3-Way Hanging Sign | 360° Visibility for Aisles, Bays & Work Cells | Free Design

Three printed faces on one suspended sign, so an aisle number, work cell or storage zone reads clearly from every approach — whichever direction a forklift, walker or visitor arrives from. One 3-way sign does the job of the two or three flat signs most plants hang back to back, and it never presents an edge to the person trying to read it.

Why three faces

• 360° visibility. The panels sit at 120° to one another, so at least one face is close to square-on from anywhere on the floor.
• One drop instead of three. Fewer hang points means less installation labour and less ceiling hardware.
• Same artwork all round as standard. Most plants run the identical bay or cell identifier on all three faces. If you want a sequence — W09 / W10 / W11 on one unit — just say so on the order; there's no extra charge.
• Light enough to hang anywhere. Under 1 lb assembled at 12" × 24", so it goes up on aircraft cable, chain or S-hooks without engineered anchors.

Specifications

Substrate	3 mm rigid foam core — dimensionally stable, indoor use
Print	Full-colour 3M cast vinyl with matte overlaminate — anti-glare under high-bay lighting, scuff and cleaning resistant
Faces	3 printed panels, same artwork on each unless you specify otherwise
Grommets	Small nickel grommets at the top and bottom corners of each vertical edge, plus a mid-height pair on the 24" × 36" and 24" × 48" sizes
Hardware	Black UV-stable zip ties included for assembly
Weight	Under 1 lb assembled (12" × 24")
Environment	Indoor — plants, warehouses, distribution centres
Lead time	3–5 weeks from written design approval

Sizes and volume pricing (CAD)

Size per side	1–4	5–24	25–49	50+
12" × 24"	$189	$165	$145	$129
18" × 24"	$245	$215	$189	$169
24" × 36"	$365	$319	$279	$249
24" × 48"	$465	$409	$359	$319

Volume pricing is applied at quotation. For runs over 50 units, or for a size that isn't listed, email info@cyanvis.com and we'll quote it.

Ships flat, assembles in under two minutes

The panels ship flat in one carton. Stand them in a triangle and zip-tie grommet to grommet down each seam — corners on the smaller sizes, plus a mid-height tie on the larger ones — then hang from the top grommets. No tools, no frame, no fasteners to source.

Where these get used

Aisle and rack identification, weld cell and production line markers, storage and staging zones, dock doors, department wayfinding, muster and andon points, and colour-coded 5S areas.

Free design on every order

Send a bay list, a floor plan, or a photo of what you have now — we build the artwork and revise it until you approve it in writing, at no charge. Where a face carries a safety message we set colours and formats to ANSI Z535.1–Z535.5, or use ISO 7010 symbols where your site standard calls for them.

What's included

• 3 custom-printed panels with grommets fitted
• Zip ties for assembly
• Artwork and unlimited design revisions

Manufactured in Brantford, Ontario. Prices in CAD, taxes extra.